When you first interact with the BEAT platform, it is very likely you’d start by searching existing results from experiments already shared with you. This guide explains how to perform searches based on the criteria of your choosing and store filtering criteria, so it is easy to repeat the search at any point in the future.
2.1. Starting a search for experiment results¶
You can use the omni-search bar or strategically placed buttons at the BEAT platform to search and compare results of experiments that have successfully finished. You may save search criteria so it is easy to re-run search terms and created your own leader boards following the topic of your interest.
There are two basic ways to start a new search at the BEAT platform. You may either type a search for experiment results using the omni-bar, present at the top of each displayed page or using strategically placed buttons with predefined search criteria.
2.1.1. Search from the omni-bar¶
To search from the omni-bar, type any search criteria. For example, try to
search for results containing the term
eigenfaces, by typing on the
You should see a webpage similar to what is displayed below:
Searching at the BEAT platform uses filters which are similar in nature to those you have for filtering e-mails on your mail reader. The more you add filters, the more specific the search is. Please refer to the Section search-filters.
2.1.2. Predefined search terms¶
You may also start a search from one of the existing preset buttons available at the platform. These buttons only trigger a search with predefined search terms based on the current start position. For example:
You may start a search from an experiment view page, by clicking on the button entitled Similar experiments. This triggers a search with the following predefined criteria:
Experiments that were done using the same toolchain as that experiment, AND
Experiments that were analyzed with the same analyzer algorithm, AND
Experiments that used the same input database
You may start a search from a toolchain view page, by clicking on the button entitled Search experiments. This triggers a search for all experiments using the said toolchain.
You may also start a search from an algorithm view page, by clicking on the button entitled Search experiments. This triggers a search for all experiments using the said algorithm.
Finally, you may also start a search from a database view page, by clicking either on the Search experiments in the database view (triggers a search for all experiments using that database) or individual protocol buttons which are similarly purposed. Clicking on protocol buttons narrows the search for experiments using the specific protocol of a given database.
2.1.3. Search Filters¶
Searching for a specific set of experiments can be accomplished by either narrowing or broadening search terms.
188.8.131.52. Narrowing your search¶
In order to narrow your search (i.e., apply logical AND rules), add more search
terms by clicking on the
+ buttons on the Filters panel. If you change your
mind, you can broaden your search back again by clicking on the
Each filter can be configured to narrow your search in a specific way.
Currently available filters are:
Database names: the name of a particular database, e.g. mobio or mobio/1 (including the database version number);
Protocols: the name of a protocol, e.g. idiap_eyepos;
Algorithms: the name of an algorithm, e.g. tutorial/pca/2;
Analyzers: the name of an analysis algorithm (i.e., use in the last block of a toolchain), e.g. tutorial/postperf_iso/1;
Experiments: the name of an experiment
Experiment authors: the username for the author of an experiment;
Experiment dates: allows you to narrow your search to experiments executed in a given date or date range. E.g. all experiments execute before October 1st. 2015;
Experiment results: narrows your search by looking to experimental results that can be set to be greater or smaller than a threshold;
Toolchains: the name of a toolchain, e.g. tutorial/eigenface/1;
Toolchain authors: the username of a toolchain, e.g. tutorial.
After selecting a filter type, the interface will change to accomodate specific options for that particular field type. For example, comparing experiment dates require you can input thresholds whereas data names don’t.
When inputing object names, it is possible to specify a precise match (use
is) or relative (use
contains), which allows users to adjust filters to
184.108.40.206. Broadening your search¶
You may broaden your search by either removing search filters or by adding more terms to a given search filter. For example, if you set the filter to Database names that contain atnt,mobio (separated by comma), it indicates to the platform you want to perform a search for all experiments using either the database named atnt or the database named mobio.
220.127.116.11. Comparing results¶
The BEAT platform allows you to compare results of experiments together creating tables and aggregated plots. The only requirement which is imposed by the platform is:
Experiments can only be compared if they use the same analyzer algorithm.
This requirements simplifies the comparison machinery and is enforced by the search application.
If the search criteria is such that experiments can’t be compared, you’ll be warned in a visible manner, such as displayed in the figure below:
In these cases, make sure to narrow your search by selecting the appropriate analyzer from the list of available filter options. Once that is done, the displayed table should now show you the relevant result information:
The experiment results are compared by certain pre-defined criteria such as eer (these are outputs of the analyzer). You can add or remove these criteria by clicking on the criteria bar available on the top-right of the table. Some of the options refer to plots, in which case the display will refresh to show you the plot(s) for the selected experiments. For example:
You may also click on any of the columns displayed to order the experiments by the information displayed on that column. This allows you to set up your own leader board with the information of your interest taking into consideration all experiments available at the platform.
2.2. Search for other resources¶
You can also search for specific resources such as toolchains, algorithms, and etc. by going to their respected page from your homepage and using the search bar that becomes available. For example, to search for a specific Algorithm, go to your homepage and find the Algorithms tab under the User Resources tab and use the search bar that is available under the Algorithms tab. You can also narrow your search by using the Privacy filter that is available next to the search bar.
2.3. Saving your Search¶
The BEAT platform allows you to save your search filters, ordering and
display options (plots, table columns), so that you can easily repeat the
search in the future. To save your search, you must be logged in with your
user account. If so, a button saying
Save will be displayed under your
search filters. Click on this button and set a name for your new setup.
All saved searches are available for re-execution at the Searches tab
available through your home page, under the
User Resources tab.
Stored searches are named using two values joined by a
username: indicates the author of the search
name: an identifier for the object
Each tuple of these two components defines a unique name inside the platform. For a grasp, you may browse publicly available stored searches.
You may add a documentation string to your saved search and share it like any other component at the platform.
2.4. Changing the Search documentation¶
In order to add or change the documentation associated to a search, click on the button Add in the Documentation part, situated under the search title, at the search view page. The box shown below will be displayed:
You may fill in a short description, that will be displayed at the search page and a longer one, in restructured text format. Use the editor and the links displayed to retrieve more information. Click on the Save button to save your documentation or the Cancel button to cancel the add/change operation. You may change the documentation of objects at the BEAT platform at any time.
2.6. Deleting a Search¶
You may delete searches at any time through the search listing page. Just click on the button Delete to delete the stored search. Once deleted, the search cannot be restored. You may re-create the search again as explained in this guide.