Deploying a macOS-based CI

This document contains instructions to build and deploy a new bare-OS CI for macOS. Instructions for deployment assume a freshly installed machine.

Note

For sanity, don’t use an OS with lower version number than the macOS SDK code that will be installed (currently 10.9). There may be undesired consequences. You may use the latest OS version in case of doubt, but by default we recommend the one before the last stable version, for stability. So, if the current version is 10.14, a good base install would use 10.13.

Warning

Idiap has throttling rules that are typically applied to all machines in the lab network. To avoid issues for newly installed CI nodes, ensure you request throttling to be disabled for new CI machines.

Building the reference setup

  1. Make sure the computer name is correctly set or execute the following on the command-line, as an admin user:

    $ sudo scutil --get LocalHostName
    ...
    $ sudo scutil --get HostName
    ...
    $ sudo scutil --get ComputerName
    ...
    
    # if applicable, run the following commands
    
    $ sudo scutil --set LocalHostName "<hostname-without-domain-name>"
    $ sudo scutil --set HostName "<fully-qualified-domain-name>"
    $ sudo scutil --set ComputerName "<fully-qualified-domain-name>"
    
  2. Disable all energy saving features. Go to “System Preferences” then “Energy Saver”:

    • Enable “Prevent computer from sleeping…”

    • Disable “Put hard disks to sleep when possible”

    • Leave “Wake for network access” enabled

    • You may leave the display on sleep to 10 minutes

  3. To be able to send e-mails from the command-line (e.g., when completing cronjobs), via the Idiap SMTP, you will need to modify the postfix configuration:

    • Edit the file /etc/postfix/main.cf to add a line stating relayhost = [smtp.lab.idiap.ch] (all e-mails should be routed by this SMTP host)

    • Edit the file /etc/postfix/generic to add a line stating admin@hostname.lab.idiap.ch hostname@lab.idiap.ch (all e-mails leaving the lab infrastruture need to have @lab.idiap.ch addresses)

    • Run postmap /etc/postfix/generic as root (required to update the internal postfix aliases)

  4. Create a new user (without administrative priviledges) called gitlab. Choose a password to protect access to this user. In “Login Options”, select this user to auto-login, type its password to confirm

  5. Enable SSH access to the machine by going on System Preferences, Sharing and then selecting Remote Login (for ssh) and Screen Sharing (for remote desktop connections). Make sure only users on the Administrators group can access the machine.

  6. Create as many Administrator users as required to manage the machine

  7. Login as administrator of the machine (so, not on the gitlab account). As that user, run the admin-install.sh script (after copying this repo from https://gitlab.idiap.ch/bob/bob.devtools via a zip file download):

    $ cd
    $ curl -o bob.devtools-master.zip https://gitlab.idiap.ch/bob/bob.devtools/-/archive/master/bob.devtools-master.zip
    $ unzip ~/Downloads/bob.devtools-master.zip
    $ cd bob.devtools-master/doc/macos-ci-install
    $ sudo ./admin-install.sh 10.9 gitlab
    

    Check that script for details on what is installed and the order. You may execute pieces of the script by hand if something fails. In that case, please investigate why it fails and properly fix the scripts so the next install runs more smoothly.

  8. Check the maximum number of files that can be opened on a shell session with the command launchctl limit maxfiles. If smaller than 4096, set the maximum number of open files to 4096 by creating the file /Library/LaunchDaemons/limit.maxfiles.plist with the following contents:

    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
        <dict>
          <key>Label</key>
            <string>limit.maxfiles</string>
          <key>ProgramArguments</key>
            <array>
              <string>launchctl</string>
              <string>limit</string>
              <string>maxfiles</string>
              <string>4096</string>
              <string>unlimited</string>
            </array>
          <key>RunAtLoad</key>
            <true/>
          <key>ServiceIPC</key>
            <false/>
        </dict>
      </plist>
    

    At this occasion, verify if the kernel limits are not lower than this value using:

    $ sysctl kern.maxfilesperproc
    10240  #example output
    $ sysctl kern.maxfiles
    12288  #example output
    

    If that is the case (i.e., the values are lower than 4096), set those values so they are slightly higher than that new limit with sudo sysctl -w kern.maxfilesperproc=10240 and sudo sysctl -w kern.maxfiles=12288 respectively, for example.

  9. Install oh-my-zsh for both the admin and gitlab users. Set ZSH theme “ys”. Add the following bits to .zshrc to ensure completions work:

    # Enables homebrew auto-completions for zsh (add: right at the top!)
    if type brew &>/dev/null; then
        FPATH=$(brew --prefix)/share/zsh/site-functions:$FPATH
        ZSH_DISABLE_COMPFIX="true"
    fi
    
    ...
    
    # plugins (add: just before sourcing oh-my-zsh)
    plugins=()
    plugins+=(docker)
    plugins+=(git)
    plugins+=(gitfast)
    plugins+=(python)
    plugins+=(themes)
    plugins+=(z)
    plugins+=(zsh-syntax-highlighting)
    plugins+=(history-substring-search)
    
  10. Enter as gitlab user and install/configure the gitlab runner:

    Configure the runner for shell executor, with local caching. As gitlab user, execute on the command-line:

    # notice that running `brew services gitlab-runner start or restart` will
    # break the configuration of the service once more.  Execute the following
    # to correct for it:
    $ /bin/bash <(curl -s https://gitlab.idiap.ch/bob/bob.devtools/raw/master/doc/macos-ci-install/reconfig-gitlab-runner.sh)
    

    Once that is set, your runner configuration (~/.gitlab-runner/config.toml) should look like this (remove comments if gitlab does not like them):

    concurrent = 8  # set this to the number of cores available
    check_interval = 10  # do **not** leave this to zero
    
    [[runners]]
      name = "<runner-name>"  # use a suggestive name
      output_limit = 102400  # this value is in kb, so we mean 100 mb
      url = "https://gitlab.idiap.ch"  # this is our gitlab service
      token = "abcdefabcdefabcdefabcdefabcdef"  # this is specific to the conn.
      executor = "shell"  # select this
      builds_dir = "/Users/gitlab/builds"  # set this or bugs occur
      cache_dir = "/Users/gitlab/caches"  # this is optional, but desirable
      shell = "bash"
    
  11. So conda works properly on a shared builder, as the gitlab user, make sure to create an empty, read-only file named ~/.conda/environments.txt. Failure to create this file and make it read-only to the gitlab user, will create a concurrence issue on the shared builder, w.r.t. to conda.

  12. While at the gitlab user, install Docker for Mac. Ensure to set it up to start at login. In “Preferences > Filesystem Sharing”, ensure that /var/folders is included in the list (that is the default location for temporary files in macOS).

  13. Once installed, go the the settings and in “General” uncheck the option “Use gRPC FUSE for file sharing”. At the time of writing (04.10.2021), the gRPC Fuse system does not work well with beat/beat.core> testing.

  14. Reboot the machine. At this point, the gitlab user should be auto-logged and the runner process should be executing. Congratulations, you’re done!

Running regular updates

We recommend that the CI machine to have homebrew and installed pip packages updated regularly (once a week). To do so, setup a cronjob like the following:

SHELL=/bin/bash
MAILTO="your.email@idiap.ch"
00 12 * * 0 /bin/bash <(curl -s https://gitlab.idiap.ch/bob/bob.devtools/raw/master/doc/macos-ci-install/update-ci.sh)