Source code for bob.bio.vein.extractor.MaximumCurvature

#!/usr/bin/env python
# vim: set fileencoding=utf-8 :

import math
import numpy
import scipy.ndimage
import bob.io.base
from bob.bio.base.extractor import Extractor


[docs]class MaximumCurvature (Extractor): """ MiuraMax feature extractor. Based on N. Miura, A. Nagasaka, and T. Miyatake, Extraction of Finger-Vein Pattern Using Maximum Curvature Points in Image Profiles. Proceedings on IAPR conference on machine vision applications, 9 (2005), pp. 347--350. Parameters: sigma (:py:class:`int`, optional): standard deviation for the gaussian smoothing kernel used to denoise the input image. The width of the gaussian kernel will be set automatically to 4x this value (in pixels). """ def __init__(self, sigma = 5): Extractor.__init__(self, sigma = sigma) self.sigma = sigma
[docs] def detect_valleys(self, image, mask): """Detects valleys on the image respecting the mask This step corresponds to Step 1-1 in the original paper. The objective is, for all 4 cross-sections (z) of the image (horizontal, vertical, 45 and -45 diagonals), to compute the following proposed valley detector as defined in Equation 1, page 348: .. math:: \kappa(z) = \\frac{d^2P_f(z)/dz^2}{(1 + (dP_f(z)/dz)^2)^\\frac{3}{2}} We start the algorithm by smoothing the image with a 2-dimensional gaussian filter. The equation that defines the kernel for the filter is: .. math:: \mathcal{N}(x,y)=\\frac{1}{2\pi\sigma^2}e^\\frac{-(x^2+y^2)}{2\sigma^2} This is done to avoid noise from the raw data (from the sensor). The maximum curvature method then requires we compute the first and second derivative of the image for all cross-sections, as per the equation above. We instead take the following equivalent approach: 1. construct a gaussian filter 2. take the first (dh/dx) and second (d^2/dh^2) deritivatives of the filter 3. calculate the first and second derivatives of the smoothed signal using the results from 3. This is done for all directions we're interested in: horizontal, vertical and 2 diagonals. First and second derivatives of a convolved signal .. note:: Item 3 above is only possible thanks to the steerable filter property of the gaussian kernel. See "The Design and Use of Steerable Filters" from Freeman and Adelson, IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 13, No. 9, September 1991. Parameters: image (numpy.ndarray): an array of 64-bit floats containing the input image mask (numpy.ndarray): an array, of the same size as ``image``, containing a mask (booleans) indicating where the finger is on ``image``. Returns: numpy.ndarray: a 3-dimensional array of 64-bits containing $\kappa$ for all considered directions. $\kappa$ has the same shape as ``image``, except for the 3rd. dimension, which provides planes for the cross-section valley detections for each of the contemplated directions, in this order: horizontal, vertical, +45 degrees, -45 degrees. """ # 1. constructs the 2D gaussian filter "h" given the window size, # extrapolated from the "sigma" parameter (4x) # N.B.: This is a text-book gaussian filter definition winsize = numpy.ceil(4*self.sigma) #enough space for the filter window = numpy.arange(-winsize, winsize+1) X, Y = numpy.meshgrid(window, window) G = 1.0 / (2*math.pi*self.sigma**2) G *= numpy.exp(-(X**2 + Y**2) / (2*self.sigma**2)) # 2. calculates first and second derivatives of "G" with respect to "X" # (0), "Y" (90 degrees) and 45 degrees (?) G1_0 = (-X/(self.sigma**2))*G G2_0 = ((X**2 - self.sigma**2)/(self.sigma**4))*G G1_90 = G1_0.T G2_90 = G2_0.T hxy = ((X*Y)/(self.sigma**4))*G # 3. calculates derivatives w.r.t. to all directions of interest # stores results in the variable "k". The entries (last dimension) in k # correspond to curvature detectors in the following directions: # # [0] horizontal # [1] vertical # [2] diagonal \ (45 degrees rotation) # [3] diagonal / (-45 degrees rotation) image_g1_0 = scipy.ndimage.convolve(image, G1_0, mode='nearest') image_g2_0 = scipy.ndimage.convolve(image, G2_0, mode='nearest') image_g1_90 = scipy.ndimage.convolve(image, G1_90, mode='nearest') image_g2_90 = scipy.ndimage.convolve(image, G2_90, mode='nearest') fxy = scipy.ndimage.convolve(image, hxy, mode='nearest') # support calculation for diagonals, given the gaussian kernel is # steerable. To calculate the derivatives for the "\" diagonal, we first # **would** have to rotate the image 45 degrees counter-clockwise (so the # diagonal lies on the horizontal axis). Using the steerable property, we # can evaluate the first derivative like this: # # image_g1_45 = cos(45)*image_g1_0 + sin(45)*image_g1_90 # = sqrt(2)/2*fx + sqrt(2)/2*fx # # to calculate the first derivative for the "/" diagonal, we first # **would** have to rotate the image -45 degrees "counter"-clockwise. # Therefore, we can calculate it like this: # # image_g1_m45 = cos(-45)*image_g1_0 + sin(-45)*image_g1_90 # = sqrt(2)/2*image_g1_0 - sqrt(2)/2*image_g1_90 # image_g1_45 = 0.5*numpy.sqrt(2)*(image_g1_0 + image_g1_90) image_g1_m45 = 0.5*numpy.sqrt(2)*(image_g1_0 - image_g1_90) # NOTE: You can't really get image_g2_45 and image_g2_m45 from the theory # of steerable filters. In contact with B.Ton, he suggested the following # material, where that is explained: Chapter 5.2.3 of van der Heijden, F. # (1994) Image based measurement systems: object recognition and parameter # estimation. John Wiley & Sons Ltd, Chichester. ISBN 978-0-471-95062-2 # This also shows the same result: # http://www.mif.vu.lt/atpazinimas/dip/FIP/fip-Derivati.html (look for # SDGD) # He also suggested to look at slide 75 of the following presentation # indicating it is self-explanatory: http://slideplayer.com/slide/5084635/ image_g2_45 = 0.5*image_g2_0 + fxy + 0.5*image_g2_90 image_g2_m45 = 0.5*image_g2_0 - fxy + 0.5*image_g2_90 # ###################################################################### # [Step 1-1] Calculation of curvature profiles # ###################################################################### # Peak detection (k or kappa) calculation as per equation (1) page 348 on # Miura's paper finger_mask = mask.astype('float64') return numpy.dstack([ (image_g2_0 / ((1 + image_g1_0**2)**(1.5)) ) * finger_mask, (image_g2_90 / ((1 + image_g1_90**2)**(1.5)) ) * finger_mask, (image_g2_45 / ((1 + image_g1_45**2)**(1.5)) ) * finger_mask, (image_g2_m45 / ((1 + image_g1_m45**2)**(1.5))) * finger_mask, ])
[docs] def eval_vein_probabilities(self, k): '''Evaluates joint vein centre probabilities from cross-sections This function will take $\kappa$ and will calculate the vein centre probabilities taking into consideration valley widths and depths. It aggregates the following steps from the paper: * [Step 1-2] Detection of the centres of veins * [Step 1-3] Assignment of scores to the centre positions * [Step 1-4] Calculation of all the profiles Once the arrays of curvatures (concavities) are calculated, here is how detection works: The code scans the image in a precise direction (vertical, horizontal, diagonal, etc). It tries to find a concavity on that direction and measure its width (see Wr on Figure 3 on the original paper). It then identifies the centers of the concavity and assign a value to it, which depends on its width (Wr) and maximum depth (where the peak of darkness occurs) in such a concavity. This value is accumulated on a variable (Vt), which is re-used for all directions. Vt represents the vein probabilites from the paper. Parameters: k (numpy.ndarray): a 3-dimensional array of 64-bits containing $\kappa$ for all considered directions. $\kappa$ has the same shape as ``image``, except for the 3rd. dimension, which provides planes for the cross-section valley detections for each of the contemplated directions, in this order: horizontal, vertical, +45 degrees, -45 degrees. Returns: numpy.ndarray: The un-accumulated vein centre probabilities ``V``. This is a 3D array with 64-bit floats with the same dimensions of the input array ``k``. You must accumulate (sum) over the last dimension to retrieve the variable ``V`` from the paper. ''' V = numpy.zeros(k.shape[:2], dtype='float64') def _prob_1d(a): '''Finds "vein probabilities" in a 1-D signal This function efficiently counts the width and height of concavities in the cross-section (1-D) curvature signal ``s``. It works like this: 1. We create a 1-shift difference between the thresholded signal and itself 2. We compensate for starting and ending regions 3. For each sequence of start/ends, we compute the maximum in the original signal Example (mixed with pseudo-code): a = 0 1 2 3 2 1 0 -1 0 0 1 2 5 2 2 2 1 b = a > 0 (as type int) b = 0 1 1 1 1 1 0 0 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 0 0 0 0 1 1 1 1 1 1 1 0 1 1 1 1 1 0 0 0 0 1 1 1 1 1 1 1 (-) ------------------------------------------- X 1 0 0 0 0 -1 0 0 0 1 0 0 0 0 0 0 X (length is smaller than orig.) starts = numpy.where(diff > 0) ends = numpy.where(diff < 0) -> now the number of starts and ends should match, otherwise, we must compensate -> case 1: b starts with 1: add one start in begin of "starts" -> case 2: b ends with 1: add one end in the end of "ends" -> iterate over the sequence of starts/ends and find maximums Parameters: a (numpy.ndarray): 1D signal with curvature to explore Returns: numpy.ndarray: 1D container with the vein centre probabilities ''' b = (a > 0).astype(int) diff = b[1:] - b[:-1] starts = numpy.argwhere(diff > 0) starts += 1 #compensates for shifted different ends = numpy.argwhere(diff < 0) ends += 1 #compensates for shifted different if b[0]: starts = numpy.insert(starts, 0, 0) if b[-1]: ends = numpy.append(ends, len(a)) z = numpy.zeros_like(a) if starts.size == 0 and ends.size == 0: return z for start, end in zip(starts, ends): maximum = numpy.argmax(a[int(start):int(end)]) z[start+maximum] = a[start+maximum] * (end-start) return z # Horizontal direction for index in range(k.shape[0]): V[index,:] += _prob_1d(k[index,:,0]) # Vertical direction for index in range(k.shape[1]): V[:,index] += _prob_1d(k[:,index,1]) # Direction: 45 degrees (\) curv = k[:,:,2] i,j = numpy.indices(curv.shape) for index in range(-curv.shape[0]+1, curv.shape[1]): V[i==(j-index)] += _prob_1d(curv.diagonal(index)) # Direction: -45 degrees (/) # NOTE: due to the way the access to the diagonals are implemented, in this # loop, we operate bottom-up. To match this behaviour, we also address V # through Vud. curv = numpy.flipud(k[:,:,3]) #required so we get "/" diagonals correctly Vud = numpy.flipud(V) #match above inversion for index in reversed(range(curv.shape[1]-1, -curv.shape[0], -1)): Vud[i==(j-index)] += _prob_1d(curv.diagonal(index)) return V
[docs] def connect_centres(self, V): """Connects vein centres by filtering vein probabilities ``V`` This function does the equivalent of Step 2 / Equation 4 at Miura's paper. The operation is applied on a row from the ``V`` matrix, which may be acquired horizontally, vertically or on a diagonal direction. The pixel value is then reset in the center of a windowing operation (width = 5) with the following value: .. math:: b[w] = min(max(a[w+1], a[w+2]) + max(a[w-1], a[w-2])) Parameters: V (numpy.ndarray): The accumulated vein centre probabilities ``V``. This is a 2D array with 64-bit floats and is defined by Equation (3) on the paper. Returns: numpy.ndarray: A 3-dimensional 64-bit array ``Cd`` containing the result of the filtering operation for each of the directions. ``Cd`` has the dimensions of $\kappa$ and $V_i$. Each of the planes correspond to the horizontal, vertical, +45 and -45 directions. """ def _connect_1d(a): '''Connects centres in the given vector The strategy we use to vectorize this is to shift a twice to the left and twice to the right and apply a vectorized operation to compute the above. Parameters: a (numpy.ndarray): Input 1D array which will be window scanned Returns: numpy.ndarray: Output 1D array (must be writeable), in which we will set the corrected pixel values after the filtering above. Notice that, given the windowing operation, the returned array size would be 4 short of the input array. ''' return numpy.amin([numpy.amax([a[3:-1], a[4:]], axis=0), numpy.amax([a[1:-3], a[:-4]], axis=0)], axis=0) Cd = numpy.zeros(V.shape + (4,), dtype='float64') # Horizontal direction for index in range(V.shape[0]): Cd[index, 2:-2, 0] = _connect_1d(V[index,:]) # Vertical direction for index in range(V.shape[1]): Cd[2:-2, index, 1] = _connect_1d(V[:,index]) # Direction: 45 degrees (\) i,j = numpy.indices(V.shape) border = numpy.zeros((2,), dtype='float64') for index in range(-V.shape[0]+5, V.shape[1]-4): # NOTE: hstack **absolutately** necessary here as double indexing after # array indexing is **not** possible with numpy (it returns a copy) Cd[:,:,2][i==(j-index)] = numpy.hstack([border, _connect_1d(V.diagonal(index)), border]) # Direction: -45 degrees (/) Vud = numpy.flipud(V) Cdud = numpy.flipud(Cd[:,:,3]) for index in reversed(range(V.shape[1]-5, -V.shape[0]+4, -1)): # NOTE: hstack **absolutately** necessary here as double indexing after # array indexing is **not** possible with numpy (it returns a copy) Cdud[:,:][i==(j-index)] = numpy.hstack([border, _connect_1d(Vud.diagonal(index)), border]) return Cd
[docs] def binarise(self, G): """Binarise vein images using a threshold assuming distribution is diphasic This function implements Step 3 of the paper. It binarises the 2-D array ``G`` assuming its histogram is mostly diphasic and using a median value. Parameters: G (numpy.ndarray): A 2-dimensional 64-bit array ``G`` containing the result of the filtering operation. ``G`` has the dimensions of the original image. Returns: numpy.ndarray: A 2-dimensional 64-bit float array with the same dimensions of the input image, but containing its vein-binarised version. The output of this function corresponds to the output of the method. """ median = numpy.median(G[G>0]) Gbool = G > median return Gbool.astype(numpy.float64)
def _view_four(self, k, suptitle): '''Display four plots using matplotlib''' import matplotlib.pyplot as plt k[k<=0] = 0 k /= k.max() plt.subplot(2,2,1) plt.imshow(k[...,0], cmap='gray') plt.title('Horizontal') plt.subplot(2,2,2) plt.imshow(k[...,1], cmap='gray') plt.title('Vertical') plt.subplot(2,2,3) plt.imshow(k[...,2], cmap='gray') plt.title('+45 degrees') plt.subplot(2,2,4) plt.imshow(k[...,3], cmap='gray') plt.title('-45 degrees') plt.suptitle(suptitle) plt.tight_layout() plt.show() def _view_single(self, k, title): '''Displays a single plot using matplotlib''' import matplotlib.pyplot as plt plt.imshow(k, cmap='gray') plt.title(title) plt.tight_layout() plt.show() def __call__(self, image): finger_image = image[0].astype('float64') finger_mask = image[1] #import time #start = time.time() kappa = self.detect_valleys(finger_image, finger_mask) #self._view_four(kappa, "Valley Detectors - $\kappa$") #print('filtering took %.2f seconds' % (time.time() - start)) #start = time.time() V = self.eval_vein_probabilities(kappa) #self._view_single(V, "Accumulated Probabilities - V") #print('probabilities took %.2f seconds' % (time.time() - start)) #start = time.time() Cd = self.connect_centres(V) #self._view_four(Cd, "Connected Centers - $C_{di}$") #self._view_single(numpy.amax(Cd, axis=2), "Connected Centers - G") #print('connections took %.2f seconds' % (time.time() - start)) #start = time.time() retval = self.binarise(numpy.amax(Cd, axis=2)) #self._view_single(retval, "Final Binarised Image") #print('binarization took %.2f seconds' % (time.time() - start)) return retval